Storage After Use; Technical Data - Echo CS-500P Instruction Manual

- Completely clean every part and repair if
necessary.
- Apply thin coating of oil on metal parts to
prevent rust.
drain fuel from carburetor.
plug hole, pull starter and crank the engine until
piston reaches: TOP DEAD CENTER.
MODEL
Dimension L × W × H
Mass Power head, dry
Engine Type
Displacement
Carburetor
Magneto
Spark plug
Starter
Power transmission
Fuel Mixture ratio
Gasoline
Tank capacity
Oil Bar and chain
Tank capacity
Guide bar and
saw chain
Lubrication
Engine speed Idle
Clutch engagement
Wide open throttle
Standard
features
* Technical data subject to change without notice.
CS-500P

STORAGE AFTER USE

TECHNICAL DATA

mm 395 × 250 × 290 (15.6 in. × 9.84 in. × 11.4 in.)
kg 4.8 (10.6 lb.) Without chain and guide bar
Air-cooled two-stroke single cylinder
mL (cm³) 50.2 (3.06 cu. in.)
Diaphragm type
Flywheel magneto: CDI system
NGK BPM8Y
Recoil starter
Automatic centrifugal clutch
50 : 1 ratio with ECHO Power Blend X™, ISO-L-
EGD (ISO/CD 13738) and JASO M345-FC/FD two-
stroke, air-cooled engine oil.
Use 89 octane unleaded.
Do not use fuel containing methyl alcohol, more than
10 % ethyl alcohol or 15 % MTBE.
Do not use alternative fuels such as E-20 or E-85.
L 0.490 (16.6 US. fl. oz.)
ECHO bar and chain oil (or motor oil)
L 0.280 (9.47 US. fl. oz.)
See page 22 for Chain and Guide Bar Combination
Adjustable automatic oil pump
2600 - 3000
r/min 3600 - 4200
11500 - 12500
Front hand guard, Rear hand guard,
Anti-vibration device, Spiked bumper,
Throttle control lockout, Chain brake, Chain catcher,
Spark arrestor muffler
30
WARNING
Do not store in an enclosure where fuel
fumes may accumlate or reach an open flame
or spark.
CAUTION
Do not lend or rent your chain saw without
the Instruction manual and Safety manual.
NOTICE
Instruction manual and the Safety manual.
has become illegible or is lost, please purchase
a new one from your ECHO dealer.
CS-500P