CS-2511PN
Setting the Saw Chain
Drive Link
Tie Strap
Right Hand Cutter
Important points for proper maintenance of saw chain:
• Keep the cutters sharp at all times.
• Keep the left and the right cutters properly aligned.
• Note that blunt or irregular cutters will result in poor cutting performance,
increased vibration of chains and premature breakage of the saw chain.
• Drive link serves to remove
sawdust from the groove of the
guide bar. Keep the lower edge of
the drive link sharp where
indicated.
Setting the Saw Chain
• For setting saw chain, round file
(4.0 mm [5/32 in.] diameter) and
flat file are used.
• Push file as shown.
• To keep correct position and
correct angle, use a file holder.
X7503334500
© 11/22 ECHO Incorporated
Preset Tie Strap
Left Hand Cutter
Guard
Link
MAINTENANCE
Top Plate
Side Plate
Depth
Gauge
Sharpen lower edge
Keep this angle
25°
53