Samsung ML 1710 - B/W Laser Printer Service Manual page 51

Disassembly and Reassembly
5.13 Pick Up Roller & Solenoid
1. Before you remove the Fuser, you should
remove:
- Top Cover(see page 5-2)
- Drive Ass'y(see page 5-7)
- Engine Shield Ass'y(see page 5-8)
2. Remove three screws from the Feed Bracket
and take it out.
Feed Bracket
3. Remove the Pick up Gear Ass'y, as shown
below.
Pick up Gear
Ass'y
Service Manual
5-12
4. Remove the Pick up Ass'y, as shown below.
Bush
1
2
Pick up Ass'y
5. Remove two screw then remove The Manual
Solenoid and Pick Up Solenoid.
(Pick up)
Solenoid
(Manual)
Solenoid
Samsung Electronics