Main Pba - Samsung ML 1710 - B/W Laser Printer Service Manual

Disassembly and Reassembly
5.8 Engine Shield Ass'y
1. Before you remove the Fuser, you should
remove:
- Top Cover(see page 5-2)
- Fuser Connector(see page 5-3)
2. Remove the fourteen screws securing from the
Engine Shield Ass'y and unplug the all connec-
tors. Then take the Engine Shield Ass'y.

5.9 Main PBA

1. Before you remove the Fuser, you should
remove:
- Top Cover(see page 5-2)
- Engine Shield Ass'y(see page 5-8)
2. Unplug one connector and remove five screws
from the Main PBA. Then lift the Main PBA out,
as shown below.
Service Manual
5-8
Engine Shield
Ass'y
Main PBA
Samsung Electronics