Download Print this page

Campbell ASPTC Information

Aspirated thermocouple, fine-wire thermocouple in aspirated radiation shield, highly accurate air temperature

Advertisement

Quick Links

Overview
The ASPTC* consists of a type-E fine-wire thermocouple mount-
ed in a fan-aspirated radiation shield to provide highly accurate
air temperature measurements. One ASPTC can measure abso-
Benefits and Features
Uses fine-wire thermocouple for accurate air temperature
measurements
Technical Description
Aspirated Radiation Shield
The ASPTC's radiation shield is an elongated tube constructed
from white UV-stabilized polyethylene that provides low ther-
mal conductivity and heat retention. A fan draws air across the
measurement junction, which reduces solar loading on the ther-
mocouple. The radiation shield also protects the thermocouple,
increasing the thermocouple's durability.
Thermocouple
The ASPTC's thermocouple is comprised of a chromel wire and
a constantan wire joined at a measurement junction. A volt-
age potential is generated when the measurement end of the
*The ASPTC is not compatible with our CR200(X)-series or CR510 dataloggers.
Highly Accurate Air
Temperature
Fine-wire thermocouple in
aspirated radiation shield
lute air temperature, or two ASPTCs can make delta temperature
measurements. Often, the ASPTC replaces, or is measured in addi-
tion to, the TCBR thermocouples in a Bowen ratio system.
Includes aspirated radiation shield
High-powered fan reduces solar loading
thermocouple is at a different temperature than the reference end
of the thermocouple. The magnitude of the voltage potential is
related to the temperature difference. Therefore, temperature can
be determined by measuring the differences in potential created
at the junction of the two wires
A reference temperature measurement (typically measured at the
datalogger wiring panel) is required. Options for measuring the
reference temperature include:
Thermistor built into the CR800, CR850, CR1000, CR3000, or
CR5000 wiring panel
PRT built into the wiring panel of the CR9050 or CR9051E input
module for the CR9000X Measurement and Control System
questions & quotes: 435.227.9000
COMPONENTS
ASPTC
Aspirated Thermocouple
campbellsci.com/asptc

Advertisement

loading

Summary of Contents for Campbell ASPTC

  • Page 1 PRT built into the wiring panel of the CR9050 or CR9051E input age potential is generated when the measurement end of the module for the CR9000X Measurement and Control System *The ASPTC is not compatible with our CR200(X)-series or CR510 dataloggers. questions & quotes: 435.227.9000 campbellsci.com/asptc...
  • Page 2: Ordering Information

    Ordering Information Mounting The ASPTC can be mounted to a tripod or tower via the UT018-5 Aspirated Thermocouple crossarm or a user-supplied crossarm that has a square cross sec- ASPTC Aspirated Thermocouple with Radiation Shield.. Must specify tion of 3.8 cm by 3.8 cm (1.5 inch by 1.5 inch).