Table of Contents
Advertisement
Item
Time Stamp
Resolution
LCD Standby
Record Voice
Beep
Record upon Power-on
Video Clip Length
Motion Detection
G-Sensor Sensitivity
Power-off Delay
Language
File Deletion
Format
Restore to Defaults
Description
Shows or hides time and date in the recordings.
Sets the image resolution.
Sets the timer for the LCD to turn off automatically (in
specified time) after recording starts.
Sets if you want to include sounds in the recordings.
Enables or disables system notification sounds.
Enables or disables the "record when power on" function.
Enables or disables the recorder to start recording
automatically once it is powered on.
Sets the length of each video clip for a continuous
recording.
When enabled, the recorder will start recording
automatically when it detects movement.
When enabled, the G sensor will prompt the recorder to
start recording automatically if an event happens.
You can change the sensitivity level of the G sensor.
Recorder can be set to turn off in 10 seconds after
power-off.
Sets the language.
Deletes file(s).
Formats a memory card. (All data will be erased.)
Restores system settings to factory defaults.
13
Hide quick links:
Advertisement
Table of Contents
