Comm Port' File Tab - Garmin StreetPilot GPS StreetPilot GPS Reference Manual

Garmin owner's manual and reference guide streetpilot gps

Table of Contents

'Comm Port' File Tab

(top right picture)

Serial Data Format - Allows you to control the input/output format used when connecting

the StreetPilot to external devices. Six format settings are available:

GARMIN Data Transfer - the proprietary format used to exchange waypoint, route, and track

log data with a PC or with another StreetPilot.

NMEA Out - supports the input/output of standard NMEA 0183 version 2.3 data.

None - provides no interfacing capabilities.

DGPS RTCM/NMEA - allows Differential GPS (DGPS) input using a standard RTCM format and

also provides NMEA 0183 version 2.3 output.

DGPS RTCM In - allows a standard RTCM DGPS input and other baud rates (besides 4800),

without any output capabilities.

Refer to Appendix C for more information on Wiring/Interfaces.

To select a serial data format:

1. Highlight the 'Serial Data Format' field and press the ENTER key.

2. Select the desired setting and press the ENTER key.

Reference

'Comm Port' File Tab

Selecting an RTCM Format

Table of Contents

Colormap - streetpilot colormap gps receiver Streetpilot gps