Ricoh LD316D Operating Instructions Manual page 31

C
Insert the paper with the side you
want to copy facing down, and
then adjust the paper guide with
the paper size.
4
1.
Horizontal size
2.
Vertical size
3.
Extender
4.
Paper guides
Note
❒ If the guides are not flush against
the copy paper, images might be
skewed or paper misfeeds might
occur.
❒ Do not stack paper over the lim-
i t m a r k , o t h e r w i s e i m a g e s
might be skewed or paper mis-
feeds might occur.
❒ Swing out the extender to sup-
port paper sizes larger than
" × 11"L.
1
A4L, 8 /
2
❒ Fan paper to get air between the
sheets and avoid a multi-sheet
feed.
1
2
3
ZENY120E
Copying from the Bypass Tray
D
Pull down the paper guide release
B
lever (step ).
The bypass tray is selected on the
display.
Note
❒ If [Byp.] is not selected on the
display, select [Byp.] using {U}
or {T}, and then press the {#}
key.
E
Select the paper size and type.
When copying onto regular size
paper
A Select [Paper Size] using {U} or
{T}, and then press the {OK}
key.
B Select [Regular Size] using {U}
or {T}, and then press the {OK}
key.
2
25