GE JSP47, JSP57, JS968 Installation Instructions Manual page 5

Installation Instructions
Ii-I Pre-lnstallation Cutout
and Required Clearances
OVERALLDEPTH
Ik_/ 27-t/2"
If cabinets are placed less than 30" above the
range, see Alternate Construction, section AF,
on page 16.
NOTE: Product meets UL requirements for 0"
clearance to back and side walls.
Wall coverings, counters and cabinets around
range must withstand heat (up to 194°F)
generated by the range.
Follow instructions
packaged with alternate
appliance.
6" Min.
Fron N_ Is
For Optimum
Installation These
Surfaces Must
Be Flat & Level
36"
from floor to
countertop
15" Min. vertical
distance from the
bottom of the adjacent
overhead cabinets
i
J Countertop
Depth 25"
1-114" Min. Countertop
to top of drawer
Electrical
Outlet Area
Shave Raised Edge
To Clear 31-1/8"
Wide Control Panel