GE JSP47, JSP57, JS968 Installation Instructions Manual page 4

Installation Instructions
Pre-lnstallation Checklist
cont.
Door removal is not a requirement for
installation of the product, but is an
added convenience. To remove the door:
Open the oven door as far as it will go.
Push both hinge
Hinge
_ Unlocked
locks down toward
_
_ Position
the door frame, Hinge"_
to the unlocked s_ot ___
position. This may
require a flat blade
Hinge
screwdriver.
Arm
DO NOT LIFT THE DOOR
BY THE HANDLE!
Place hands on both sides of
the door, and close the oven
door to the removal position.
This is half way between the
broil stop and fully closed.
[_ ift door up and
out until the
hinge arms
clear the slots.
%
Hinge Clears Slot
NOTE: The oven door is very heavy,
Be sure you have a firm grip before lifting
the oven door off the hinges, Use caution
once the door is removed, Do not lay the
door on its handle, This could cause dents
or scratches,
i1_ Remove packing materials. Remove
labels on door, plastic on trim and panel,
and all tape around the range.
Storage Drawer Removal
Pull the drawer out until it stops.
Lift the front of the drawer until the
stops clear the guides.
Rail
Pull forward and remove the drawer.