Re-Fitting The Transit Bars - Miele W1724 Operating Instructions Manual

,
To avoid the risk of injury the
holes for the transit bars must be
covered after the transit bars have
been removed.
^ Fit the covers onto the two holes.
Then plug the holes as shown with
the caps.
Installation and connection
^ Secure the transit bars to the back of
the washing machine. Make sure that
holes are fitted over retainers
,
The machine must not be moved
without the transit bars in place.
Store them as shown or keep them
in a safe place for future use. They
must be re-fitted if the machine is to
be moved again (e.g. when moving
house).

Re-fitting the transit bars

Re-fitting is carried out by reversing the
procedure.
.
51