Sanyo FXCD-500 Operating Instructions Manual page 11

ATP (AUTO TRAVEL PRESET) OPERATION . . . . . . . . . . . . . .
4
The Auto Travel Preset function searches for and memorizes the 6 strongest stations in one of the two bands
(FM I, AM) in order of signal strength
This feature is useful when you are driving in an unfamiliar location and want to memorize local stations without
changingthe standard preset stations
A total of 12 stations (6 FM and 6 AM) can be programmed
l
To set the stations
q
Select the desired band
q
Press and hold the ATP button @for more than 2 seconds 'ATP" ap-
pears in the display
l
Quick Tuning of ATP Stations
When the stations have been memorized, scanning stops and the
strongest station is selected
q
Select the desired band
q
Press the ATP button if the "ATP" indicator does not appear in the dis-
play
l
To scan programmed stations
q
Press button @for less than 1 second to select the desired ATP preset
Each time the ATP button is pressed, the next ATP preset is selected
If a total of six stations cannot be preset "- - -"will be displayed for the
empty channels
See "PRESET-SCAN OPERATION"
- Notes
'r
l
If no station can be received, "- - -' appears in the display
l
If fewer than 6 stations can be received, the system will memorize as many stations
as possible, then select the one memorized first
l
If ATP mode is selected in FM
II
band, FM I ATP mode is selected
PRESET-SCAN OPERATION (using BND button) . . . . . . . . . .
1, 4
This function scans each of the preset stations stored in the selected band (both manual preset and auto travel
resets)
rl 1 Press the BND button 0 for FMI, FMII, or AM Press the ATP button @for less than 0 5 seconds to select
the desired band or ATP mode
q
Press the BND button @for more than 2 seconds The system will select and receive each preset station for
5 seconds
q
To stop scanning and retain the station currently selected, press the BND button 0 again during thisfive-se-
cond period