Download Print this page

Kenmore 415.162080 Assembly Instructions Manual page 18

Liquid propane gas grill for outdoor use only
Hide thumbs Also See for 415.162080:

Advertisement

LPTank Exchange
• Many retailers thatsell grills offer you the option of replacing
your empty LP tank through an exchange service. Use only
those reputable exchange companies that inspect, precision fill,
test and certify their cylinders. Exchange your tank only for
an OPD safety feature-equipped tank as described in the
"LP Tank" section of this manual.
• Always keep new and exchanged LP tanks in upright position
during use, transit or storage.
• Leak test new and exchanged LP tanks BEFORE
connecting to grill,
Connecting
Regulator To The LP Tank
1, LP tank must be properly secured onto grill. (Refer to
Assembly Manual)
2, Turn all control knobs including sideburner (if featured) to the
OFF position.
3, Turn LP tank OFF by turning hand-wheel clockwise to a full
stop.
4, Remove the protective cap from LP tank valve. Always use
cap and strap supplied with valve.
LP Tank Leak Test
For your safety
• Leak test must be repeated each time LP tank is exchanged or
refilled.
• Do not smoke during leak test.
• Do not use an open flame to check for gas leaks.
• Grill must be leak tested outdoors in a well-ventilated area,
away from ignition sources such as gas fired or electrical
appliances. During leak test, keep grill away from open flames
or sparks.
• Use a clean paintbrush and a 50/50 soap and water solution.
Use mild soap and water, • Do not use household
cleaning agents. Damage to gas train components can result.
Brushsoapysolution
ontoareasindicated
by arrows.
SafetyReliefValve
~OPD HandWheel
threadon outside
Strapand Cap
Do not use a POL transport plug
(plastic part with external threads)!
It will defeat the safety feature of
the valve.
If "growing" bubbles appear do not use or move the LP tank.
Contact an LP gas supplier or your fire department!
18 • 463843104
5, Hold regulator and insert nipple into LP
tank valve. Hand-tighten the coupling
nut, holding regulator in a straight line
with LP tank valve to as not to cross-
thread the connection.
Nipplehasto be centered
intothe LP tankvalve.
J

Advertisement

loading