Bose PowerMatch PM8500 Technical Data Sheet page 3

PowerMatch
configurable power amplifier
General
Setup and Configuration Software ControlSpace® Designer™ software V3.2 or greater
PC Interface Connection USB (Network version adds Ethernet RJ45)
Fault Notification Output NC/NO Relay Contact (1 A, 30 VDC), 3-pin Phoenix Contact® connector (orange color; part # 1976010)
Footnotes:
1 Output power is measured per channel, all channels driven, using test signals at 1 kHz.
2 Configuration not recommended / not optimal.
3 Derated use available. Refer to the application note "Using MONO Mode (single channel) to Drive High Impedance Loudspeaker Loads".
4 Measured at +24 dBu sensitivity unless otherwise specified.
Bose Professional Systems Division
PM8500 / PM8500N
®
3
OF 6
p r o . B o s e . c o m