Advertisement
Grill@Night
T M
Night Light HandleAssembly
Note: On the underside of the lamp assembliesare "L" for left side and "R" for right side.
Match to letter on the handle.
•
Remove Grill@Night label if present from front of grill lid.
"
Install lamp assemblies inside grill lid. Position lamp assembly so that terminal passes through larger hole in
grill lid. See CORRECTASSEMBLY BELOW. Insert thumbscrews (provided with handle)through lamp
assemblies and grill lid, then into handle.
"
Remove the two battery door screws and install the six C-size batteries as indicated inside battery compartment.
•
Replace battery door and screws.
Note: Two extra 6V 3W bulbs are contained inside the bulb holders attached to the bottom ofthe handle.
®
#10-24x314" Thumbscrew
Qty: 2
CAUTION."
To prevent a shorting
condition, make sure the lampassemblies
are fully inserted into grill lid. The
|ight
wii|
not work
correctly
until
fully
assemb|ed
to the
gril|
|id.
Screw
Grill lid
/
assembly
Screw
Grill lid
assembly
Bulb
/
4--
Battery Door Screws
Grill@Night
TM
,if_
LightHandleAssembly
Holder
46432t607
and 464321407 • 2t
Advertisement
