Cleaning And Care - Garmin StreetPilot i2 Owner's Manual

A
PPENDIX

Cleaning and Care

Your StreetPilot is constructed of high-quality materials and does not require user maintenance other
than cleaning. Clean the outer casing (except for the screen) using a cloth dampened with a mild detergent
solution. Wipe dry. Avoid chemical cleaners and solvents that can damage plastic components. Clean the
screen using a soft, clean, lint-free cloth. Use water, isopropyl alcohol, or eyeglass cleaner if needed. Apply
the liquid to the cloth and then gently wipe the screen.
Avoiding Damage
Your StreetPilot contains sensitive electronic components that can be permanently damaged if exposed to
excessive shock or vibration. To minimize the risk of damage, avoid dropping your StreetPilot or operating
it in high shock/vibration environments.
Follow the cautions below to protect your StreetPilot from damage:
• Do not store it where prolonged exposure to extreme temperatures can occur (such as in the trunk of a
car), because permanent damage may result.
• Do not expose it to water. Contact with water can cause it to malfunction.
• Do not leave it in plain sight when you leave your vehicle. Take it with you or remove it from view to
avoid theft.
• Remove the batteries if you are storing it for more than a month without using it. Otherwise, keep
batteries installed at all times to ensure that it acquires satellite signals quickly each time you turn
it on.
Garmin © 2006 22 StreetPilot i2/i3/i5 Owner's Manual
®