GE JTP15AA Installation Instructions Manual page 5

Installation Instructions
Cutouts for Single Built-In-Oven
ALLOW 11/16"FOR
OVERLAPOFTHE
OVEN OVER SIDE _
EDGES OF CUTOUT
J 21" _ _ _ _
ALLOW A MINIMUM
OF 21" FOR CLEARANCE
TO ADJACENT CORNERS,
DRAWERS, WALLS ETC.
WHEN THE DOOR IS OPENED.
CUTOUT
WIDTH
_--.-28112"MIN._..,_
285/8"MAX.--
THE OPENING
BETWEEN INSIDE
WALLS MUST
BE AT LEAST
28 1/2"WIDE
ALLOWl"FOR
OVERLAP
ON OVEN TOP
ANDBOTTOM
OFCUTOUT
WIDTH
30"
I
I
I
CUTOUT
HEIGHT
27 1/4" MIN
27 5/16"
RECOMMENDED
CUTOUT
LOCATION
321/2"
FROM THE
FLOOR
JUNCTION BOX
J LOCATION
Cabinet Width 30"
Recommended
Cutout Location
from Floor 32 1/2"
22"TO
BOTTOM OF
JUNCTION BOX
Cutout Depth
Cutout Width
23 1/2" Min.
28 1/2" Min.
28 5/8" Max.
Cutout Height 27 1/4" Min.
27 5/16"Max.
NOTE: If the cabinet does not
have a front frame and the sides
are less than
3/4" thick, shim both sides
equally to establish the cutout
width.
=
SUITABLE
TO SUPPORT
RUNNERS
21 5/8"
OVER CENTERLINE
4" or
EQUIVALENT
RUNNERS
If the cabinet does not have a solid
bottom, then two braces or runners
must be installed to support the
weight of the oven. For single ovens
the runners and braces must
support 150 pounds.
THIS OVEN IS NOT APPROVED FOR STACKABLE
OR SIDE BY SIDE INSTALLATION