Download Print this page

Kenmore 758.144108 Operator's Manual page 5

Whole house humidifier 10 gallon output

Advertisement

Available languages

Available languages

Location Instructions
WARNING:
For your own safety, do
not use humidifier if any parts are
damaged or missing.
Step 1 :
Place humidifier on a flat level surface in
an area of your house where humidity is
needed most, or in an area which would
likely result in moist air being circulated
throughout the house, such as near a
cold air return.
Placing the unit level is very important.
Special attention should be given to unit's
level if the humidifier is located on
carpeting.
Moist air (humidity) produced will
disperse into the whole house, but the
area closest to the unit wilI have the
highest humidity. If the unit is positioned
close to a window, condensation
may
form on the window pane. If this is not
appropriate
the unit should be
repositioned
in another location.
NOTE: Due to release of cool, moist air
from humidifier, it is best to direct air
away from thermostat and hot air
registers. It is best to position humidifier
next to an inside wall. Hot air registers
and cold air from outside walls can affect
the efficiencies of the controls. Unit
should not be placed where warm air
from a hot air register blows directly on
unit.
Step 2:
The humidifier should be positioned with
the back (cord exit side) and left side, at
least 2 inches away from the wall. Air
needs to enter through alI of the louvers
in the housing assembly in order for the
humidifier to operate at peak efficiency.
At least 2 inches
from wall
Electrical
Hook-Up
,
Locate nearest 120V A.C. wall socket in
the location desired, preferably on inside
wail. With the humidifier in the desired
location, route the electrical cord safely
so no one wilI trip or upset the humidifier.
Plug in the electrical cord.
If the plug does not fit fully in the outlet,
reverse plug. If it still does not fit, contact
a qualified electrician to install the proper
outlet. Do not change the plug in any
way.
WARNING:
To reduce the risk of fire
or shock hazard, humidifier should
be plugged into a 120V A.C. outlet.
Do not use extension cords.
To reduce the risk of electrical shock, this
humidifier has a polarized plug (one
blade is wider than the other). This plug
will fit in a polarized outlet only one way.

Advertisement

loading