Humidifier Operations; Assembly - Kenmore Sears 758.144107 Quiet comfort Owner's Manual

Humidifier Operation
Your new Sears humidifier is designed to
satisfy home humidity requirements
through the principle of evaporation of
water into the air.
After water is added to the humidifier, the
filter begins to soak up the water and will
become saturated in approximately 30
minutes. Air drawn in through the open-
ings in the lower housing passes through
the filter by means of a circulation fan. As
air passes through the filter, moisture is
absorbed into the air and then released
in the form of vapor. No water droplets
will enter the home. All evaporation into
the air takes place in the humidifier,
which means that the residue left by
evaporating water is not passed into the
home, but remains in the filter_
This natural process of evaporation helps
eliminate the chance of white dust in the
humidified output air.
CAUTmON: Use only 42°14900 EPA
Registered Bacteriostat available
from SEARS Retail store. Under no
circumstances should you use water
treatment products designed for
Roto belt or Ultrasonic humidifiers.
Humidified air is
then reBeased
through the top
Dry air
enters
through the
louvers in
the housing
CAUTION: To reduce the risk of
injury, fire or damage to humidifier,
use only cleaners specifically recom-
mended for humidifiers. Never use
flammable, combustible or poisonous
materials to clean your humidifier. To
reduce the risk of scalds and damage
to humidifier, never put hot water in
humidifier.
Assembly
Carefully remove the humidifier and a!l
other contents from the carton.
There is a black strip that contains six
pads for the bottom of the humidifier.
Remove each pad and place one on
each of the six legs on the bottom of the
base as shown, by the solid dots.
Once installed return the humidifier to
it's original state and proceed to
'Location Instructions".
3
4
5