Table of Contents
Advertisement
1. Channel Guide
TV channels
- It is used to enter the TV channels list for you
to select or sort the TV channels as your desired.
Radio channels
- It is used to enter the Radio channels list
for you to select or sort the Radio channels as your desired.
Channels class
- Select this option to edit the programs as
your desired.
Channels edit
- Select this option to edit the channels name,
move or delete the channels as your desired.
2. System config
TV setting
TV system: it is used to select TV system.
TV type: it is used to select the TV scan mode, please set as
per your TV set.
Options: 4:3PS : Normal Pan & scan mode
4:3LB : Normal Letter box mode
16:9 : 16:9 wide screen mode
Video setting
BRIGHTNESS - to set the brightness for the display.
CONTRAST - to set the contrast effect for display.
HUE - to set the colour impression for display.
SATURATION - to set the saturation level for display.
Language
Please select one of desired language for the system.
Parent Control
Change pin-It is used to change the password.
1) Enter old password in the OLD PIN row
2) Enter new password in the NEW PIN row
3) Enter the new password again in the CONFIRM row
The default user password is 0000.
Channel lock-it is used to lock the channels.
Time setting
Time zone-it is used to select local time zone.
System info
Select this option, the system info shows on the screen such
as: Update date, Tuner info, F/W version Model version etc.
3. Installation
Auto Scan
-select one of country from <select area> row, then
enter <start scan> row by navigation button to begin scanning
the channels.
Manual scan
-scroll to manual scan option, a dialogue shows
on the screen for you to set, after then, select <start scan>
option to begin scanning the channels.
Default setup
-select this option to restore the factory setting.
DISC HANDLING PRECAUTIONS
—
Hold the disc by the edge so the surface will not
be soiled with finger prints. Finger prints, dirt and
scratches can cause skipping and distortion.
—
Do not write on the label side with a ball-point pen
or other writing utensils.
—
Do not apply benzine, thinner, and liquid that
prevents against static electricity.
—
Be careful not to drop or bend the disc.
—
Install only one disc on the disc tray.
—
Do not try to close the disc tray when the disc is
not installed properly.
—
Be sure to store the disc in its case when not in
use.
6
Advertisement
Table of Contents
