Disc Handling Precautions - Denver MTW-753 TWIN Operating Manual

3. VIDEO SETUP
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
3.1 BRIGHTNESS - to set the brightness for the display.
Options: 0/2/4/6/8/10/12
3.2 CONTRAST - to set the contrast effect for display.
Options: 0/2/4/6/8/10/12
3.3 HUE - to set the colour impression for display.
Options: -6/-4/-2/0/+2/+4/+6
3.4 SATURATION - to set the saturation level for display.
Options: 0/2/4/6/8/10/12
4. SPEAKER SETUP
SPEAKER SETUP
DOWNMIX
4.1 DOWNMIX
Options: LT/RT - Left/Right mix mode
STEREO - Select this option if you don't have a 5.1
channels amplifier.

DISC HANDLING PRECAUTIONS

—
Hold the disc by the edge so the surface will not
be soiled with finger prints. Finger prints, dirt and
scratches can cause skipping and distortion.
—
Do not write on the label side with a ball-point
pen or other writing utensils.
—
Do not apply benzine, thinner, and liquid that
prevents against static electricity.
—
Be careful not to drop or bend the disc.
—
Install only one disc on the disc tray.
—
Do not try to close the disc tray when the disc is
not installed properly.
—
Be sure to store the disc in its case when not in
use.
6