Dvb Operations - Denver MT-979DVBT Operating Manual

1.3 TV TYPE - it is used to select the TV scan mode, please
set as per your TV set.
Options: 4:3PS : Normal Pan & scan mode
4:3LB : normal Letter box mode
16:9 : 16:9 wide screen mode
1.4 PASSWORD - input password to unlock the system. The
steps are as follows:
1.4.1 Enter SYSTEM SETUP, select the PASSWORD item by
scrolling the down navigation button, and then press the
right navigation button to select the input box.
1.4.2 Input user's password "0000" to unlock it, in this case,
select the input box again to change the password by
inputting another new four numeric numbers and then
press OK button to confirm. When the password is
changed, you are needed to input the new one to unlock
the system.
1.4.3 Once you forget your own password, use the
supervisor's password "8200" to unlock it.
NOTE : If wrong password was input in unlock status, the
system will lock.
1.5 RATING - Set the rating of this player. If you want to
change the rating of parental lock, please input the
password to unlock first.
Options: 1 KID SAFE / 2 G / 3 PG / 4 PG 13 / 5 PG-R /
6R / 7 NC-17 / 8 ADULT
1.6 DEFAULT - Reset to factory settings.
Options: RESTORE
2. LANGUAGE SETUP
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
2.1 OSD LANGUAGE - It is used to select different On
Screen Display language for different user.
2.2 AUDIO LANG - select preferred audio language. (DVD
only, need disc software support)
2.3 SUBTITLE LANG- Select preferred subtitle language.
(DVD only, need disc software support)
2.4 MENU LANG - Select preferred disc menu language.
(DVD only, need disc software support)
3. VIDEO SETUP
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
3.1 BRIGHTNESS - to set the brightness for the display.
Options: 0/2/4/6/8/10/12
3.2 CONTRAST - to set the contrast effect for display.
Options: 0/2/4/6/8/10/12
3.3 HUE - to set the colour impression for display.
Options: -6/-4/-2/0/+2/+4/+6
3.4 SATURATION - to set the saturation level for display.
Options: 0/2/4/6/8/10/12
4. SPEAKER SETUP
SPEAKER SETUP
DOWNMIX
4.1 DOWNMIX
Options: LT/RT - Left/Right mix mode
STEREO - Select this option if you don't have a 5.1
channels amplifier.

DVB OPERATIONS

GET STARTED
—
Be sure the TV antenna is connected to your player
properly;
—
Power on the player and press FUNCTION button on the
remote or press and hold FUNCTION button on the unit to
switch to DVB-T mode.
A dialogue of first time installation shows on the screen, select
YES option to perform the first time installation, then select
the options as mentioned in the dialogue to finish the first time
installation, select NO option to exit this interface.
SEARCH A PROGRAM
Press NAVIGATION UP/DOWN button to change the channel
number. A desired channel can be reached using these two
keys.
Once the desired channel is selected, it will start broadcasting
the selected channel immediately.
SWITCHING BETWEEN TV/RADIO
During DVB play mode, press TV/RADIO button on the
remote to switch to RADIO play mode (Need signal source
support).
TELETEXT
Press TTX button to display teletext information (Need signal
source support).
ELECTRONIC PROGRAM GUIDE
Press EPG button on the remote to enter into electronic
program guide in DVB mode
PROGRAM INFORMATION
Press INFO button during DVB play mode to show the
program detail information
LANGUAGE
Press LANGUAGE button on the remote to change different
language supplied by TV programs in DVB mode
source support) .
FAVORITE
Press FAV button to enable or disable the favorite function
after set the channels class on the setup menu, and press
navigation UP/DOWN menu to switch the channel among
your favorite channels selected on the setup menu.
DVB-T SETUP MENU
1. Press SETUP Button once, the setup menu will be called
out on the screen.
2. Use navigation LEFT/RIGHT button to switch among the
three different main setup interfaces. Press navigation
UP/DOWN button to highlight the setting options and enter
corresponding submenu as indication. After setting, press
SETUP button to go back main setup interface.
3. Use SETUP button to exit setup menu.
5
(Need signal source support).
(Need signal source support).
(Need signal