Display Panel - HP Pavilion dm1 Maintenance And Service Manual

Display panel

Description
11.6-in, LED, HD, BrightView SVA display panel for use only with computer models equipped with
an AMD processor
11.6-in, LED, BrightView SVA display panel
Before removing the display panel, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service door (see
Remove the display panel:
1. Turn the computer right-side up, with the front toward you.
2. Open the computer.
3. Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge (3) of
the display bezel until the bezel disengages from the display enclosure.
4. Remove the display bezel (4). The display bezel includes the display hinge covers and the lid
switch magnet. For spare part numbers, see
5. Remove the four Phillips PM2.0×3.6 screws (1) that secure the display panel to the
display enclosure.
46 Chapter 4 Removal and replacement procedures
Battery on page 44).
WLAN module on page
Display assembly subcomponents on page
Spare part number
668353-001
659506-001
48).
25.