Removing The Unit - Kenwood DNX7230DAB Quick Start Manual

Removing the unit

1) Remove the trim plate by
referring to step 1 in "Removing
the trim plate".
2) Insert the two extraction key
(accessory4) deeply into the slots
on each side, as shown.
3) Lower the extraction key toward
the bottom, and pull out the unit
halfway while pressing towards
the inside.
NOTE
• Be careful to avoid injury from the catch
pins on the extraction key.
4) Pull the unit all the way out with
your hands, being careful not to
drop it.
DNX7230DAB/DNX5230DAB/DNX5230BT/DNX4230DAB/DNX4230BT
4
29