System Set-Up - Fender Passport 150 Pro Owner's Manual

Congratulations on your purchase of a Fender® Passport® 150
Pro audio system. Your Passport is a self-contained, portable
audio system that includes everything you need for great sound
anywhere you go!
Carry your Passport as you would a suitcase. When you arrive,
simply flip open the cabinet release latches and inside you'll
discover two full-range speaker cabinets, a powered mixer, plus
all the cables you'll need to get started. Use your Passport as
a public address system or to amplify musical instruments and
singing. You can connect a music playback device such as a CD
player, MP3 player or even a computer audio interface to provide
1. Flip open the cabinet latches on the sides of the
Passport and detach the speaker cabinets from the
powered mixer section.
2. For optimal results, elevate the speaker cabinets on
Passport Speaker Stands or on sturdy tables and
place the speakers far apart to maximize stereo
separation. Position the mixer close to where you
will be performing so you will have easy access to
the control panel.
6 6
Passport® 150 Pro Passport® 150 Pro
accompaniment. The Passport's quick and easy set-up, its ability to
cover large audiences and its simple operation are the hallmarks of
this innovative product.
The Passport's control panel features both mono mic/line channels
and stereo line channels with a variety of input jacks to provide you
with superb flexibility in making connections. You'll find the digital
Reverb effect helpful for creating a warmer sound.
Don't forget to visit www.fender.com/passport
of Passport accessories including wireless microphone systems,
speaker stands, customer support and much more!

System Set-Up

System Set-Up
3. Open
compartment on the
rear of the mixer and
remove the power
cord
cables.
NOTE: The back wall
of the storage com-
partment features a
docking
for a Passport UHF
Wireless Microphone
System.
4. Plug the speaker cables into the left and right
speaker jacks on the back of the mixer, then
connect the corresponding left and right speakers.
Make sure the power switch is off, then plug the
supplied power cord into the power socket on
the back of the mixer and the other end into a
grounded AC power outlet.
fender.com fender.com
www.fender.com/passport to see a full line
the storage
and speaker
connector
½
FUSE
T4A H
250V
INPUT POWER
225W