Bracketing - FujiFilm X-M1 Owner's Manual

Bracketing

Bracketing
Automatically vary settings over a series of pictures.
1
Press the selector down (I) when the camera is in shooting mode, and then
press the selector up or down to highlight one of the following:
Option Option
Press the selector left or right to highlight a bracketing amount. Each time the
shutter button is pressed, the camera will take three shots: one using the metered
AE BKT AE BKT value for exposure, the second overexposed by the selected amount, and the third
underexposed by the same amount (regardless of the amount selected, exposure
will not exceed the limits of the exposure metering system).
Press the selector left or right to highlight a bracketing amount. Each time the
shutter is released, the camera will take a picture at the current sensitivity (P 47)
ISO BKT ISO BKT and process it to create two additional copies, one with sensitivity raised and the
other with sensitivity lowered by the selected amount (regardless of the amount
selected, sensitivity will not exceed ISO 6400 or fall below ISO 200).
Each time the shutter is released, the camera takes one shot and processes it to
FILM SIMULATION FILM SIMULATION
create copies with the fi lm simulation settings selected for X FILM SIMULATION
BKT BKT
BKT in the shooting menu (P 71).
Each time the shutter button is pressed, the camera takes three shots with diff erent
dynamic ranges (P 71): 100% for the fi rst, 200% for the second, and 400% for the
DYNAMIC RANGE DYNAMIC RANGE
third. While dynamic range bracketing is in eff ect, sensitivity will be restricted to a
BKT BKT
minimum of ISO 800; the sensitivity previously in eff ect is restored when bracket-
ing ends.
Press MENU/OK to select the highlighted option.
2
Take photographs.
60
Description Description
2 1
±1 ± ±
3 3
AE BKT