Projecting A Waypoint - Garmin GPSMAP 276C Owner's Manual

Projecting a Waypoint

You can also create a new waypoint by "projecting" the distance and
bearing from a specific location to a new location.
To create a new waypoint by projecting its location:
1. Create a waypoint using your favorite method (discussed in
previous sections). The new waypoint is created with the next
available waypoint number and the receiver's last known
position as the default position.
2. Press MENU twice to open the Main Menu.
3. Highlight Points from the vertical list of tabs using the
Rocker key.
4. Press MENU to open the New Waypoint page options menu.
5. Highlight Project Location and press ENTER.
Project Location Menu
Enter the desired distance, bearing, and location to project from.
GPSMAP 276C Owner's Manual
B O M M
ASIC PERATION IN ARINE
6. To change the location from which you are projecting the new
waypoint, highlight the From field and press ENTER. The
Find Menu opens.
Select the point that you will project your new waypoint from
just as you would select a waypoint or point of interest. For
more information see the
7. To adjust the distance that the new waypoint will be projected
beyond the original waypoint, highlight the Distance field
and press ENTER. Enter the projection distance and press
ENTER.
To adjust the bearing that the new waypoint will be projected
from the original waypoint, highlight the Bearing field and
press ENTER. Enter the bearing and press ENTER.
8. When you have adjusted all elements of the projected
location, highlight Save and press ENTER.
9. Make any other desired changes to the new waypoint data
(such as the name or symbol), then highlight OK and press
ENTER.
> C U W
ODE REATING AND SING AYPOINTS
"Finding an Item" section.
31