Editing Your Route; Entering Custom Avoids - Garmin GPSMAP 276C Owner's Manual

B O A
ASIC PERATION IN UTOMOTIVE

Editing Your Route

Once you are navigating a route, you can edit that route. You can
add areas and roads to avoid as well as temporary detours to your
current route. You can also add stops along your trip, called via
points.
While navigating, press the NAV key to open the Navigate Menu,
shown below.
Navigate Menu in Automotive Mode
While navigating a course
62
M > E Y R
ODE DITING OUR OUTE

Entering Custom Avoids

Custom Avoids allows you to enter specific areas and roads that
you would like to avoid in your navigation. Custom Avoids apply
to all routes, but Detours apply to only the active route. Custom
Avoids can be added while you are navigating a route or before you
navigate.
To enter a custom avoid:
1. Press the NAV key while navigating to a destination in
Automotive Mode. Or, open the Map page and press MENU.
2. Select Custom Avoids. Press ENTER.
3. Press ENTER when the Add Avoid button is highlighted.
4. Select Avoid Road or Avoid Area and press ENTER.
5. Use the Rocker key to move the arrow to the first point in the
avoidance area. Press ENTER to select the first point.
6. Move the arrow to the end point and press ENTER. During
route calculation and navigation, the GPSMAP 276C will
avoid the area within the box or the selected area of the road.
7. When finished, highlight the OK button and press ENTER.
GPSMAP 276C Owner's Manual