Table of Contents
Advertisement
Lab Guide—At a Glance
This advanced oscilloscope training guide and tutorial is intended to be
used with Agilent Technologies InfiniiVision 2000 X- Series oscilloscopes
(DSO and MSO models) that are licensed with the Oscilloscope Education
Training Kit (DSOXEDK). When licensed with this training kit,
2000 X- Series oscilloscopes are able to generate a broad range of built- in
training signals.
The built- in training signals can be probed by simply connecting a
standard 10:1 passive probe between channel- 1's input BNC and the front
panel terminal labeled "Demo 1", and another probe between channel- 2's
input BNC and the terminal labeled "Demo 2" as shown on the next page.
To turn on specific training signals for each of the labs documented in this
training guide, simply:
1
2
3
4
Agilent 2000 X-Series Oscilloscopes
Advanced Training Guide
1
Getting Started
Lab Guide—At a Glance
Front Panel Overview
Press the scope's front panel [Help] key.
Press the Training Signals sofkey.
Turn the
Entry knob to select the appropriate training signal.
Press the Output softkey to enable the training signal output on the
Demo terminal(s).
5
6
s1
5
Advertisement
Table of Contents
