Table of Contents
Advertisement
20
Figure 4
Your scope's display should now look similar to
continuously update measurements; Frequency, Vp- p, Vmax, and Vmin.
Let's now perform four different measurements.
21
22
23
2000 X-Series Oscilloscopes Advanced Training Guide
Turn the Entry knob again until the arrow points to Minimum; then
push the Entry knob.
The scope automatically performs up to four parametric measurements.
Press the Clear Meas softkey; then press the Clear All softkey.
Set the scope's timebase to 200.0 ns/div. Expanding on the pulse will
provide us with increased measurement resolution.
Now select to measure Top, Base, Rise Time, and Fall Time.
Oscilloscope Familiarization Labs
Figure 4
showing four
2
15
Advertisement
Table of Contents
