Completing Your Installation With A Light Fixture - Hunter Ceiling fans Installation And Operation Manual

7 • Completing Your Installation With a Light Fixture
an
he
e
Steps 7-1 – 7-3
10 10
Hunter Fan Company
Housing
Upper
Assembly
Switch
Screw
Housing
WARNING: Use only the light fixture supplied with this fan model.
7-1. To attach the upper switch housing, partially install two housing
assembly screws into the switch housing mounting plate.
7-2. Feed the upper plug connector through the center opening of the
housing.
7-3. Align the keyhole slots in the housing with the housing assembly
screws.
7-4. Turn the housing counterclockwise until the housing assembly
screws are firmly situated in the narrow end of the keyhole slots.
Install the remaining screw into the housing. Tighten all three
screws firmly.
CAUTION: Make sure the upper switch housing is securely
attached to the switch housing mounting plate. Failure to properly
attach and tighten all three assembly screws could result in the
switch housing and light fixture falling.
42639-01 • 4/5/07