Using Tracks - Garmin GPS 152H Owner's Manual

Navigation
4. Highlight the waypoint that is before the waypoint you want to
add, and press Menu.
5. Select Insert Waypoint.
6. Select a waypoint from the
7. Select OK.
8. Continue to add waypoints, if necessary.
9. Press Quit to save the route.
To remove a waypoint on a route:
1. From any Main page, press
2. Highlight Rte.
3. Select the route you want to edit.
4. Highlight the waypoint you want to delete, and press Menu.
5. Select Remove Waypoint.
Note: The waypoint is removed from the route. It is not deleted.
To invert an existing route:
1. From any Main page, press
2. Highlight Rte.
3. Select the route you want to invert.
4. Highlight any waypoint, and press Menu.
5. Select Invert.

By Name list or the Nearest
Menu twice.
Menu twice.
To delete a route:
1. From any Main page, press
2. Highlight Rte.
list. 3. Highlight the route you want to delete, and press Menu.
4. Select Delete
To delete all saved routes:
1. From any Main page, press
2. Highlight Rte, and press Menu.
3. Select Delete

Using Tracks

A track is a recording of your path. The track currently being
recorded is the active track. An active track can be saved. To adjust
track settings, see
Turning Tracks On or Off
1. From any Main page, press
2. Highlight Trk
3. Select Record
• Off—does not record a track log.
• Fill—record a track log until the track memory is full.
• Wrap—continuously records a track log, replacing the oldest
track data with new data.
Menu twice.
Route.
Menu twice.
All.
page 12.
Menu twice.
> Active.
Mode.
GPS 152H Owner's Manual