Using The Celestial Tab; Using The Gps Tab - Garmin GPS 152H Owner's Manual

Garmin chartplotter owner's manual
Hide thumbs Also See for GPS 152H:
Table of Contents

Advertisement

Using the Celestial Tab

The Celestial tab shows information about sunrise, sunset, moonrise,
moonset, the moon phase, and the approximate sky view location of
the sun and moon. By default, the unit shows celestial information
for the present date and time.
From any Main page, press
To select a date and time for which to view celestial information,
select the date or time field and enter text as described on
page
2.
If your orientation is set to North Up and you want to quickly
switch to Track Up while viewing the Celestial screen, press
Menu
and select
Track
Up.

Using the GPS Tab

The GPS tab displays GPS satellite positions and signal strength
bars.
From any Main page, press
Receiver status is indicated by the bar across the top of the screen.
Looking For Satellites
AutoLocate
—The receiver does not know your previous
®
location. This process can take up to five minutes.
GPS 152H Owner's Manual
Menu
twice and highlight Celes.
Menu
twice and highlight GPS.
Acquiring Satellites—The receiver is looking for, and
collecting, data from satellites visible at the last known or
initialized position, but has not collected enough data to calculate
a fix.
2D Navigation—At least three satellites with good geometry
have been acquired and a two-dimensional position fix (latitude
and longitude) is being calculated.
3D Navigation—At least four satellites with good geometry
have been acquired and your position is now being calculated in
latitude, longitude and altitude.
Poor Satellite Reception—The receiver is no longer tracking
enough satellites for a 2D or 3D fix.
Receiver Not Usable—The receiver is unusable, possibly due
to interference or abnormal satellite conditions. Turn the unit off
and back on to reset.
Simulating Navigation—The receiver is in simulator mode
(page
23).
GPS accuracy information is indicated along the bottom of the
screen.
Accuracy—indicates the approximate accuracy of the unit.
DGPS Rcvr—indicates the status of the DGPS receiver
(page
16).
Settings
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

190-01219-00

Table of Contents