Scanning Waypoints - Garmin GPS 120XL Owner's Manual

To rename a stored waypoint:
1. Highlight the 'RENAME?' field and press
2. Enter the new waypoint name and press
F
3. Press the
To delete a stored waypoint:
1. Highlight the 'DELETE?' field and press
L
2. Press the key to select the 'YES' prompt.
F
3. Press to delete the waypoint.

Scanning Waypoints

As you manually enter a waypoint' s name, the GPS
120XL' s waypoint scanning feature will automatically
display the first numerical or alphabetical match of the
character you have entered to that point. This helps
eliminate the need to always enter a waypoint' s com-
plete name.
To scan waypoints from a waypoint field:
1. Highlight the waypoint name field and press
L
2. Press the key to clear the name field.
U
3. Use the and
points.
4. If you have more than one waypoint that begins with
the same letter or number, you must use the
move to the next character positions as needed. Only
the first character match is listed for each name.
5. Once you've found the desired waypoint, press
key to confirm your changes.
D
keys to scroll through way-
F
.
F
.
F
.
F
.
R
key to
F
.
REFERENCE
Editing and
Scanning
Waypoints
A warning page will ask you
for confirmation to delete
the selected waypoint.
Note: If a waypoint is part
of a route, it must be
removed before it can be
deleted. (See p 34)
Waypoint names will
appear alphabetically
when scanning waypoints.
If two waypoints begin with
the same letter(s) you must
move the cursor to the first
letter they do not have in
common for them to appear.
25