Using The Position And Map Pages - Garmin GPS 120XL Owner's Manual

The mark position page will appear, showing the
captured position and a default 3-digit waypoint name.
Let' s change the default name to something a little more
meaningful, like 'DOCK'.
U
1. Press the
from the 'save' field to the name field.
F
2. Press and
name.
3. Press and hold the
alphabet until the letter 'D' appears.
R
4. Press the key once to move the character highlight
to the next character space.
5. Repeat steps 3 and 4 until the word 'DOCK' is dis-
played.
F
6. Press to complete entry of the name.
D
7. Press the
the 'save' field.
F
8. Press the
the position as a waypoint named 'DOCK'.
The mark position page will now be replaced by
the Position Page (or whatever page was displayed
prior to pressing the
is now stored in the GPS 120XL' s memory, and will
remain there until you manually remove it or clear the
receiver' s memory. For more on waypoint management,
see pages 19-25.

Using the Position and Map Pages

Now that you've marked a position, let' s see how
the Position and Map Pages can be used to monitor
your progress as you head out in to the open water.
As always, ensure your primary focus is on
!
boating traffic and monitor the GPS120XL
briefly when operating your boat.
key twice to move the field highlight
L
to clear the default waypoint
U
key to scroll through the
key once to return the field highlight to
key to confirm that you want to save
M key). The 'DOCK' waypoint
GETTING
STARTED
Marking A
Position
The arrow keypad is used
for all data entry. Use the
UP and DOWN keys to
select letters, numbers, or
menu options, and use the
LEFT and RIGHT keys to
move the cursor forward or
backward along the line.
Position Page
11