Textual Metar Page - Garmin GNC 420AW Pilot's Manual

Part Two: Section 2
XM Weather

Textual METAR Page

When the GDL 69/69A is installed, a Textual
METAR page is added among the APT (airport) pages
of the WPT page group. This page can be accessed
from the XM Weather page as well as from the WPT
page group.
To display Textual METARs from the Nav XM
Weather page:
1. While viewing the Nav XM Weather page, press
the MENU key to display the Page Menu.
2. Turn the large or small right knob to high-
light "Show Map Pointer?" and then press
ENT.
Turn the large or small right knob to move
3.
the Map Pointer to highlight an airport with a
METAR flag.
Press ENT to display the METAR text. With
4.
"Done?" highlighted, press ENT to return to
the map view.
18
To view any airport's Textual METAR page:
If not viewing the WPT page group, press CLR
1.
and turn the large right knob to select the
WPT page group.
Turn the small right knob until the Textual
2.
METAR page appears.
3. To select another airport, press the small right
(CRSR) knob to highlight the airport ID (in the
"APT" field).
4. Turn the small and large right knobs to edit
the airport identifier for the desired airport.
Then, press ENT to confirm the airport name.
Press the small right (CRSR) knob again to
5.
remove the cursor (that is, to stop highlighting
the APT field).
190-00356-30 Rev H