Cleaning the air fi lter
(If
is displayed on the remote controller)
1.
Open the front panel.
•
Open the front panel by placing a fi nger on the panel tab on either side of the front panel and then secure it using the
supporting plate on the right.
2.
Pull out the air fi lters.
Air filter
•
Push a little upwards the air fi lter.
3.
Clean the air fi lter.
•
Wash the air fi lters with water or clean them with vacuum cleaner.
•
If the dust does not come off easily, wash them with neutral detergent thinned with lukewarm water,
then dry them up in the shade.
4.
Set the air fi lter as it was and close the front panel.
•
Insert the air fi lter with the "FRONT" marking to the
front.
•
Be sure to insert the two tabs below.
•
Return the supporting plate to its previous position.
•
Press either side of the front panel.
5.
Reset the fi lter cleaning
indicator.
ATTENTION
•
Using without cleaning will lower the COOLING or HEATING capability, wasting electricity.
Page 20
Supporting
plate
•
Pull the air fi lter down.
Tabs
Tabs
23