•
CAUTION
Attaching and removing the front pane
1.
Open the front panel.
•
Placing a fi nger on the panel tab on either side of the front panel.
2.
Remove the front panel.
•
Spread out the shaft hole and remove the rotating shaft. (Both left and right sides.)
3.
Attach the front panel.
•
Place the revolving axes on either side of the front panel into the holes and slowly close.
(Press either side of the front panel.)
Only open the front panel after turning the unit off.
Opening the panel during operation may cause the panel to fall off.
Front panel
Rotating shaft
Rotating shaft
Shaft hole
Shaft hole
21