Table of Contents
Advertisement
3
Plug the large end of the USB cable into a computer USB
port.
4
Go to www.garminconnect.com/start.
5
Follow the on-screen instructions.
Garmin Connect
Garmin Connect gives you a simple way to store and track your
activities, analyze your data, and share with others. To sign up
for a free account, go to www.garminconnect.com/start.
Store your activities: After you complete and save an activity
with your device, you can upload that activity to Garmin
Connect and keep it as long as you want.
Analyze your data: You can view more detailed information
about your activity, including an overhead map view, pace
and speed charts, and customizable reports.
Share your activities: You can email your activities to others,
or post links to your activities on your favorite social
networking sites.
Customizing Your Device
Routing Options
From the home screen, select
Routing Mode: Sets the transportation method to optimize your
route.
Calculation Method: Sets the method used to calculate your
route.
Lock On Road: Locks the position icon, which represents your
position on the map, onto the nearest road.
Avoidance Setup: Sets the road types to avoid while
navigating.
Recalculation: Automatically recalculates the route when you
deviate from the route.
Customizing the Trip Pages
You can customize the data that appears on each trip page.
1
From the home screen, select
2
Select a page.
3
If necessary, enable the page.
4
Select an option to change it.
Map Settings
From the home screen, select
Map Data Fields: Sets the data fields that appear on the map.
Orientation: Adjusts how the map is shown on the page
(page
5).
Auto Zoom: Automatically selects the appropriate zoom level
for optimal use on your map. When Off is selected, you must
zoom in or out manually.
Map Detail: Sets the level of detail on the map. More detail may
cause the map to draw slower.
Customizing Your Device
> Routing Options.
> Trip Pages.
> Trip Pages > Map.
Map Information: Enables or disables the maps currently
loaded on the device.
Changing the Map Orientation
1
From the home screen, select
Orientation.
2
Select an option:
• Select North Up to show north at the top of the page.
• Select Track Up to show your current direction of travel at
the top of the page.
• Select 3D Mode to show an automotive perspective with
the direction of travel at the top.
Compass Settings
From the home screen, select
Compass: Enables or disables the compass page.
Data Fields: Sets the data fields that appear on the compass
page.
Elevation Settings
NOTE: The Edge Touring shows elevation information only
when the device is navigating a route. The Edge Touring Plus
displays elevation information at any time.
From the home screen, select
Elevation: Enables or disables the elevation page.
Data Fields: Sets the data fields that appear on the elevation
page.
Customizing the Timer Page
You can customize the data fields that appear on the timer
page.
1
From the home screen, select
2
Select
or
to change the number of data fields on the
page.
3
Select
.
4
Select a data field to change the data type that appears in
the field.
5
Select
.
Marking Laps by Distance
You can use Auto Lap ® to automatically mark the lap at a
specific distance.
1
From the home screen, select
Trigger > By Distance > Lap At.
2
Enter a value.
Marking Laps by Position
You can use Auto Lap to automatically mark the lap at a specific
position.
1
From the home screen, select
Trigger > By Position > Lap At.
2
Select an option:
• Select Lap Press Only to trigger the lap counter each
time you select
and each time you pass any of those
locations again.
• Select Start and Lap to trigger the lap counter at the GPS
location where you select
the ride where you select
• Select Mark and Lap to trigger the lap counter at a
specific GPS location marked before the ride and at any
location during the ride where you select
Display Settings
From the home screen, select
> Trip Pages > Map >
> Trip Pages > Compass.
> Trip Pages > Elevation.
> Trip Pages > Timer.
> Auto Lap > Auto Lap
> Auto Lap > Auto Lap
and at any location during
.
.
> System > Display.
5
Hide quick links:
Advertisement
Table of Contents
