Crown I-T4000 Operation Manual page 24

I-tech series
Hide thumbs Also See for I-T4000:
Table of Contents

Advertisement

4 Advanced Operation
1B. Once the Properties window opens (Figure 4.4), click on Internet Protocol (TCP/IP).
Figure 4.4 Internal Properties Window
The Internet Protocol (TCP/IQ) Properties window appears (Figure 4.5). Dis-
able Virtual Private Network or other encryption settings.
See Section 4.5.7, TCP/IQ Addressing Worksheet, later in this document.
Open the supplied Excel worksheet called IQ Worksheet.XLS.
page 24
1C. We recommend that you uncheck "Obtain an IP address automatically", and check
"Use the following address." If you decide to set an IP address manually, specify an IP
address. The IP address is four numbers between 1 and 255 separated by periods. For
example, 126.126.0.1.
Select a subnet mask. The subnet mask is four numbers between 1 and 255 separated by
periods. For example, 255.255.0.0.
1D. Click OK and close the Control Panel. At this point, some computer operating systems
will require a restart.
Figure 4.5 Internet Protocol (TCP/IP) Properties Window
I-Tech Series Power Amplifiers
Operation Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

I-t6000I-t8000

Table of Contents