Table of Contents
Advertisement
OPERATION
CONTROL PANEL
The Electric Steamer's front control panel digitally
displays the temperature and timer which are set
with separate (+/-) function buttons.
The steam oven has a START/STOP button for the
cook cycle. The START/STOP button is also used to
interrupt operation during a set program without
having to turn the unit off (opening and closing the
steam oven door will have the same affect.) The
ON/OFF button controls the power to the Electric
Steamer. The display is illuminated when the unit is
on, and is dark when the unit is off.
• Temperature display shows the internal cabinet
temperature unless the (+/-) Temperature button
was recently pressed.
• Temperature and cook time cannot be changed
during the programmed operation unless the
START/STOP button is pressed.
• When starting a programmed setting, the timer
will not begin to count down until the steam oven
cabinet
has
reached
temperature setting.
Timer Display
Auto Fill ON Symbol
Temperature Display
Form No. STMSM-1007
the
programmed
Timer Increase Button (+)
Low Water
Symbol
AUTO
Safety Lock
Symbol
On/Off Button
Timer Decrease Button (-)
Figure 7. Control Panel
During the operation of the Electric Steamer the
Temperature display will sometimes show the
following symbols:
• The safety lock symbol
temperature display when the oven door is
opened during a set program. (See Figure 7.)
The symbol will disappear when the oven door is
closed.
• When the water level is too low, the low water
symbol
will appear in the display (See Figure
8), the unit will beep and the operation will stop.
The water tank will have to be refilled before
continuing to use the steam oven.
• When in the Auto Fill mode, the word AUTO will
appear in the display. (See Figure 7.)
Temperature Increase Button (+)
1
I / O
Pre-programmed Timer Buttons
Temperature Decrease Button (-)
8
will flash in the
Start/Stop Button
and Auto/Manual
fill Button
2
3
4
5
START
/STOP
AUTO/
MANUAL
Advertisement
Table of Contents
