Fujitsu Stylistic M532 User Manual page 49

Switch your tablet off by one long press of the ON/OFF switch and confirm the question on the shut down
8
OK
with .
Switch your tablet on again.
9
When you see the Android logo on the screen, press the ON/OFF switch and the volume button (increase volume)
10
and keep them pressed for 2 seconds and then release them. After a few seconds you reach the restore mode.
I F
F THE UJITSU LOGO APPEARS ON THE SCREEN
REACH THE RESTORE MODE
wipe data/factory reset
Select
11
N
AVIGATE AS FOLLOWS THROUGH THE MENU
V
•
OLUME BUTTON
V
•
OLUME BUTTON
ON/OFF
•
Follow the instructions on the screen to perform the system update. After the system update has completed,
12
you will be in the restore mode again.
Reboot system now
Select
13
.
.
( )
INCREASE VOLUME TO SELECT AN OPTION ABOVE THE CURRENT OPTION
( )
DECREASE VOLUME TO SELECT AN OPTION BELOW THE CURRENT OPTION
SWITCH TO CONFIRM THE SELECTION
to finish the system update.
,
THEN YOU HAVE NOT REACHED THE RESTORE MODE
:
48 - Getting Started with Android
. R
EPEAT THE ABOVE STEP UNTIL YOU