Replacing Ink Cartridges - Epson XP-310 Quick Manual

Store ink cartridges in a cool, dark place. If cartridges have been exposed to cold
temperatures, allow them to warm up to room temperature for at least 3 hours before
using them.

Replacing Ink Cartridges

Make sure you have a new ink cartridge before you begin. You must install new cartridges
immediately after removing the old ones.
Caution: Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
Note: Leave the expended cartridge installed until you have obtained a replacement, or
the ink remaining in the print head nozzles may dry out.
1. Turn on your printer.
2. If a cartridge is low, you can continue printing until a cartridge needs replacement.
If an ink cartridge is expended, you see a message on the LCD
screen. Note which cartridges need to be replaced and press
.
OK
If you're replacing a cartridge before you see a message on the
LCD screen, press
Maintenance
press .
OK
3. Lift up the scanner unit.
4. Squeeze the tab on the cartridge and lift it up. Dispose of it
carefully. Do not take the used cartridge apart or try to refill
it.
Warning: If ink gets on your skin, wash it off with soap and
water. If ink gets in your eyes, flush them immediately with
water. If it gets in your mouth, spit it out and see a doctor
right away.
16
Replacing Ink Cartridges
if necessary and select
, then select
Ink Cartridge Replacement
. Select
F Setup
and