XP-300 Small-in-One
Start Here
Read these instructions before using your product.
Note for Spanish speakers/Nota para hispanohablantes:
Para obtener instrucciones de confi guración en español, consulte la
Guía de instalación en www.epson.com/support/xp300sp (requiere una
conexión a Internet).
1
Unpack
Caution:
Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials, including from inside the printer.
2
Turn on and adjust
1
Raise the paper support, then connect the power cord to
the back of the printer and to an electrical outlet.
Caution:
Do not connect to your computer yet.
2
Raise the control panel, then press the
*412247200*
*412247200*
Printer
™
power button.
Note:
If you want to lower the control panel, squeeze the release
bar underneath.
Caution:
Do not lower the control panel without first squeezing the
release bar underneath or you may damage the product.
3
To select English as your language, press OK.
If you want to change the language, press
it, then press
.
OK
Note:
You can change the language later using the product's
control panel. For more information, see the online User's Guide.
3
Install ink cartridges
Note:
Don't load paper yet.
1
Lift up the scanner unit, and wait until the ink cartridge
holder stops moving.
2
Shake the ink cartridges gently 4 or 5 times, then
unpack them.
3
Remove only the yellow tape from each cartridge.
Caution:
Don't remove any other seals or the cartridges may leak.
4
Insert the cartridges in the holder for each color, and press
each cartridge down until it clicks.
or
to select
Need help?
Do you have a question about the XP-300 and is the answer not in the manual?
Questions and answers