Troubleshooting - Garmin 610 Owner's Manual

A
PPENDIX
Battery Gauge
The battery icon in the upper-right corner of the Menu page indicates the status of the
internal battery. Periodically, you might notice that the battery gauge is not completely
accurate. To increase the accuracy of the battery gauge, fully discharge the battery and
then fully charge it without interrupting the charging. For best results, do not unplug
the nüvi until it is totally charged.

Troubleshooting

Problem/Question
My nüvi never gets satellite
signals.
My battery gauge does not
seem accurate.
The touch screen is not
responding to my taps
properly.
My phone will not connect to
the nüvi.
56
Battery charging or connected to external power
Full battery
Take your nüvi outside, away from tall buildings
and trees.
Allow the nüvi to fully discharge and then fully
charge it (without interrupting the charge cycle).
Calibrate the screen. On the Menu page, touch
Settings
button and follow the on-screen instructions.
Verify that the Bluetooth field is set to Enabled.
Make sure your phone is turned on and is less
than 10 meters (about 33 feet) away from your
nüvi.
See www.garmin.com/bluetooth
Solution/Answer
> Display. Touch the
nüvi 610/660 Owner's Manual
Recalibrate
for more help.