Garmin 610 Owner's Manual page 63

Problem/Question
How do I know my nüvi is in
USB Mass Storage Mode?
My computer never senses
that the nüvi is connected.
I cannot find any drives
named "nüvi" in my list of
drives.
I keep getting a message
saying "Unsafe Removal of
Device" when I unplug the
USB cable.
nüvi 610/660 Owner's Manual
Solution/Answer
When your nüvi is in USB Mass Storage Mode,
a picture of a nüvi connected to a computer is
shown on the nüvi. Also, you should see a new
removable disk drive listed in My Computer.
1. Unplug the USB cable from your computer.
2. Turn the nüvi off and then back on again.
3. Plug the USB cable into your computer.
The nüvi automatically goes into USB
Mass Storage Mode.
The nüvi cannot communicate with Windows
Windows 98, or Windows Me.
Try the solution listed above.
If you have several network drives mapped
on your computer, Windows may have trouble
assigning drive letters to your nüvi drives. Follow
the steps on the following page
drive letters.
To disconnect your nüvi from your computer,
double-click the Unplug or Eject
system tray. Select "USB Mass Storage Device,"
and click Stop. Select the nüvi drives, and click
OK. Disconnect your nüvi from your computer.
A
PPENDIX
95,
®
to assign your
icon in your
57