Garmin GPSMAP 60Cx Owner's Manual page 40

B O >
ASIC PERATION
3. Select either Follow Road to route back to
the selected point using available roadways,
or select Follow Track to retrace your original
path of travel. Highlight the Don't Ask Again
option, and press ENTER if you want to use
the same option each time you use TracBack.
The Map Page opens, with directions to the
first turn on the track at the top of the page.
4. Move in the direction of the first turn. When
you reach the first turn, directions to the next
turn are shown, and so on, until you reach
your destination.
5. To exit, press MENU, and select Stop
Navigation.
To create a user waypoint on a saved
track:
1. With a saved track shown on the map, use
the ROCKER to move the pointer to the place
on the track that you want to mark as a user
waypoint. If the pointer is placed on the map
where no map item is located, a prompt asks if
you want to create a waypoint.
2. Press and hold the ENTER key to open the
Mark Waypoint Page.
30
3. Customize the user waypoint, highlight OK,
and press ENTER to save it.
GPSMAP 60Cx Owner's Manual
Creating a
Waypoint on a
Track