3. Replace the battery cover.
For best results, after you install new
batteries, update the battery type in the
system settings
(page
Turning the Device On or
Off
Press and hold
Setting Your Language
1. Turn on the unit.
2. Use the Rocker to select a
language.
GPSMAP 62 Series Quick Start Manual
10).
.
acquiring Satellite
Signals
It may take 30 to 60 seconds to acquire
signals.
1. Go outdoors to an open area.
2. If necessary, turn on the device.
3. Wait while the device searches for
satellites.
A question mark flashes while the
device determines your location.
4. Quickly press
backlight status page.
The GPS bars indicate satellite
strength. When the bars are green,
the device has acquired satellite
signals.
to open the
3