Network Setting (Network Setting Screen); Password Setting (Change Password Screen) - Panasonic TH-47LFX6 Operating Instructions Manual

Using Web Browser Control

NETWORK SETTING (NETWORK SETTING Screen)

Click NETWORK SETTING from the menu. Various settings of a network can be set. For the details of the setting
items, please check Network Setup under the Set up of the unit. (see page 44)
Notes:
• To use a DHCP server, make sure the DHCP server
is started.
• During a DHCP server is used, IP ADDRESS,
SUBNET MASK, and GATEWAY values cannot be
entered.
• When the set values are changed properly,
"NETWORK SETTING CHANGED." message and
the changed set items are displayed.

Password Setting (CHANGE PASSWORD Screen)

Click CHANGE PASSWORD from the menu. Password to access the Web browser control can be set. When
the password is changed in this screen, the password used for command control and the PJLink™ security
authentication is also changed.
Notes:
• The default password is "Panasonic".
• Up to 32 alphanumeric characters can be used for a
password.
• When the password is changed properly, "Password
has changed." message is displayed.
54
Item
Set to ON when a DHCP server is
DHCP
used, or OFF when it is not used.
IP ADDRESS Enter an IP address.
SUBNET MASK Enter a subnet mask.
GATEWAY Enter a gateway address.
Enter the port number used for
PORT command control. The available
setting range is 1024 - 65535.
Set the connection speed of the LAN
LAN SPEED
environment.
Set the ID to identify this unit. The
NETWORK ID
available setting range is 0 - 99.
SAVE Save the each set value.
Item
OLD
Enter the old password.
PASSWORD
NEW
Enter the new password.
PASSWORD
NEW
Enter the password entered in "NEW
PASSWORD
PASSWORD" for con rmation.
(RETYPE)
Save the new password. The
SAVE con rmation screen is displayed.
Click OK to change the password.
Details
Details