Advanced Settings - Panasonic TH-47LFX6 Operating Instructions Manual

Item Effect
Backlight
Darker
Contrast*
Less
Brightness
Darker
Sharpness
Less
* In "ENGLISH (US)" OSD language, this is displayed as "PICTURE".

Advanced settings

Item Effect
Input level
Less
Gamma
Down
W/B High
R
Less
W/B High
G
Less
W/B High
B
Less
W/B Low R
Less
W/B Low G
Less
W/B Low B
Less
Notes:
• Carry out "W/B" adjustment as follows.
1. Adjust the white balance of the bright sections using the "W/B High R", "W/B High G" and "W/B High B" settings.
2. Adjust the white balance of the dark sections using the "W/B Low R", "W/B Low G" and "W/B Low B" settings.
3. Repeat steps 1 and 2 to adjust.
Steps 1 and 2 affect each other's settings, so repeat each step in turn to make the adjustment.
• The adjustment values are memorized separately for each input terminal.
• The adjustment range values should be used as an adjustment reference.
Helpful Hint (
On the remote control unit, while the "Advanced settings" menu is displayed, if either the N button is pressed at any time or
the ACTION ( ) button is pressed during "Normalise", then all adjustment values are returned to the factory settings.
Adjustments
Adjusts luminance of the back
light.
Brighter
Selects the proper brightness
and density for the room.
More
Adjusts for easier viewing of
dark pictures such as night
Brighter
scenes and black hair.
Adjusts picture sharpness.
More
Adjustment of parts which are extremely bright and hard to see.
More
S Curve
Up
Adjusts the white balance for light red areas.
More
Adjusts the white balance for light green areas.
More
Adjusts the white balance for light blue areas.
More
Adjusts the white balance for dark red areas.
More
Adjusts the white balance for dark green areas.
More
Adjusts the white balance for dark blue areas.
More
/ Normalisation)
Normalise
Notes:
• You can change the level of each function
(Backlight, Contrast, Brightness, Sharpness)
for each Picture Mode.
• The setting details for normal, dynamic
and cinema respectively are memorized
separately for each input terminal.
• "Backlight" can be adjusted when "ECO
Mode" is set to "Custom" and "Power save"
to "Off". (see page 34)
Details
2.0 2.2 2.6
Picture Adjustments
27